Unistrut Wing Shape Fittings

Robexstrut is a trusted supplier of high-quality Unistrut wing shape fittings, including popular models like P2225, P1046A, and P2223. Manufactured from ASTM A1011 SS GR 33 steel, these fittings are built for durability and reliability, making them ideal for various construction and industrial applications. Whether for electrical, plumbing, or HVAC systems or heavy industrial equipment installations, our Unistrut wing shape fittings provide superior structural support and versatility, ensuring the highest standards of performance and long-lasting solutions for your projects. These fittings are tested according to industry standards for superior quality and performance.

Get in touch with Robexstrut today for premium Unistrut Wing Shape Fittings for your next project!

Looking for the best Unistrut Wing Shape fitting near you. We are the top Unistrut Wing Bracket Supplier in Mumbai, India.

Unistrut Wing Shape Specification

Material :

Fittings, unless noted, are made from hot-rolled, pickled, and oiled steel plates, bar, strip, or coil, and conform to one or more of the following specifications: ASTM specifications A575, A576, A635, A1011 SS GR 33, A1011 HSLAS GR 45, or A36.
All fittings meet or exceed physical properties of ASTM A1011 GR 33.
The pickling of the steel produces a smooth surface free from scale.
Many fittings are also available in stainless steel, aluminum, and fiberglass. Consult the factory for ordering information.

Finishes :

Fittings are available in:

Green Powder Coat (GR): Conforming to commercial standards for Powder Coating.
Electro-galvanized (EG): Conforming to ASTM B633 Type III SC1.
Hot-dipped galvanized (HG): Conforming to ASTM A123 or A153.
Plain (PL): Standard plain finish.
Unistrut Defender (DF): Conforming to ASTM A1059 or A1046.

*** Perma Green finish is a commercial-grade finish, and as such, scuffs and scratch marks are to be expected. If a flawless finish is desired, it is recommended to apply matching touch-up paint. ***

Application :

All part drawings illustrate only one application of each fitting. In most cases, many other applications are possible.
The channels shown in the illustrations are P1000 (1-5⁄8″ square), except where noted otherwise.
All 9⁄16″ diameter holes use 1⁄2″ x 15⁄16″ hex head cap screws and 1⁄2″ nuts – P1010, P3010, P4010, or P5510 – depending on the channel used.
Nuts and bolts are not included with the fitting and must be ordered separately.

Dimensions :

Imperial dimensions are illustrated in inches.
Metric dimensions are shown in parentheses or as noted.
Unless noted, all metric dimensions are in millimeters and rounded to one decimal place.

Design Load :

Design load data, where shown, is based on the ultimate strength of the connection with a safety factor of 2.5, unless otherwise noted.

Beam Clamps :

Clamps are designed to be used with W, M, S, and HP Shape beams, Standard C and Miscellaneous MC Channels, Angles, and Structural Tees.
Clamps must be used in pairs and mounted in opposite directions where indicated.
For beam clamps with HG finish, standard hardware is EG finish.
For optional stainless steel hardware, please contact the factory for availability.

Design Bolt Torque

Bolt Size	1/4″-20	5/16″-18	3/8″-16	1/2″-13	5/8″-11	3/4″-10
Rec. Torque Ft/Lbs (N•m)	6 (8)	11 (15)	19 (26)	50 (68)	100 (136)	125 (170)
Max Torque Ft/Lbs (N•m)	7 (9)	15 (20)	25 (34)	70 (95)	125 (170)	135 (183)

Set Screw Torque

Bolt Size	1/4″-20	5/16″-18	3/8″-16	1/2″-13	5/8″-11	3/4″-10
Set Screw Torque In/Lbs (N•m)	6 (8)	11 (15)	19 (26)	50 (68)	100 (136)	125 (170)

Standard Dimensions

Standard Dimensions for 1-5/8″ (41.3 mm) width series channel (Unless otherwise specified in Catalog):

Hole Diameter: 9/16″ (14.3 mm)

Hole Spacing – From End: 13/16″ (20.6 mm)

Hole Spacing – On Center: 1-7/8″ (47.6 mm)

Width: 1-5/8″ (41.3 mm)

Thickness: 1/4″ (6.4 mm) with steel meeting or exceeding ASTM A1011 SS GR 33, or 0.220″ (5.6mm) with steel meeting or exceeding ASTM A1011 HSLAS GR 45

Note: When used for mechanical supports, load capacities of brackets, fittings and other supporting elements should be in compliance with the American Standard Code for Pressure Piping. Clamps are designed to be used with W, M, S & HP Shape beams, Standard C & Misc. MC Channels, Angles & Structural Tees. Clamps must be used in pairs where indicated. For beam clamps with HG finish, standard hardware is EG finish. For optional stainless steel hardware, please contact the factory for availability.